series 0501 strip-line sockets with bifurcated contact wire wrap pins note: aries specializes in custom design and production. in addition to the standard products shown on this page, special materials, platings, sizes, and configurations can be furnished, depending on quantities. aries reserves the right to change product specifications without notice. features: ? for mounting liquid crystal displays and other high pin count or odd centered components. ? available in several sizes with bifurcated cont acts in wire wrap or solder t ail pins. consult data sheet no. 12008 for solder t ail pins. ? optional spacer available for mounting on .300 [7.62], .600 [15.24], .900 [22.86], 1.100 [27.94], and 1.300 [33.02] centers. consult factory for other sizes. specifications: ? body is black ul 94-v0 glass-filled 4/6 nylon. ? pin is grade a phosphor bronze per qq-b-750. ? optional spacer is fr-406, .032 [.81] thick. ? pin plating is: 11 = 10 [.25m] min. gold per mil-g-45204 over 50 [1.27m] min. nickel per sae-ams-qq-n-290. 10 = 200 min matte tin per astm b545-97 over 50 ? min. nickel per sae-ams-qq-n-290. 10tl = 200 min. 90/10 tin/lead per mil-t-10727 type 1 over 50 ? min. nickel per sae-ams-qq-n-290. ? current rating=1 amp. ? operating temperature= -67f to 221f [-55c to 105c] tin & tin/lead plating, = -67f to 257f [-55c to 125c] gold. ? insertion force=110 grams/pin average; withdrawal force=75 grams/pin average. ? accepts flat leads up to .014 x .020 wide [.36-.51], round leads up to .020 [.51] in diameter. ? socket accepts lead lengths from seating plane .080-.160 [2.03-4.06]. mounting considerations: ?suggested pcb hole size=.045 .002 [.1.14 .05] dia. xx-0501-xxxx ordering informa tion no. of pins (see table) single row socket series plating: 0=tin 0tl= tin/lead 1=gold 2=2 level wire wrap 3=3 level wire wrap ordering informa tion (for spacer bar) a=(no. of pins x .100 [2.54]) + .050 [1.27] b=(no. of pins per row - 1) x .100 [2.54] series center-to-center mounting desired (c dimension) 0500-x.xxx other sizes available. consult factory. cont act det ail no of pins no of grooves 20 2 25 2 30 2 34 3 40 2 spacer bar dim. l 2 level wire wrap .420 [10.67] 3 level wire wrap .690 [17.52] all tolerances .005 [.13] unless otherwise specified consult data sheet no. 12008 for strip-line sockets with solder tail pins. a ll dimensions : inches [ millimeters ] 12009 rev. e printouts of this document may be out of date and should be considered uncontrolled bristol, pa usa tel: (215) 781-9956 fax: (215) 781-9845 http://www.arieselec.com ? info@arieselec.com abc
|
